The Department of Land Resources in the Ministry of Rural Development has released a draft version of The Land Titling Bill, 2011 on its website. This draft is a major revision of the original draft Bill released in 2010. Public comments on this draft are invited before June 24, 2011. A copy of the draft can be found here. The Bill provides for the registration of all immovable property to establish a system of conclusive, electronically recorded titles. It also provides for a mechanism to invite objections and for the resolution of disputes through special tribunals. The property record will be considered as conclusive ownership by the person mentioned. This will help resolve uncertainties in property transactions. Given that land is a state subject, the Bill is meant to be a model law for adoption by the states individually. The framework of the bill is explained below. I. Land Titling Authority and Preparation of Records The Bill establishes a Land Titling Authority at the State level. The Authority’s task is to prepare a record of all immovable properties in its jurisdiction. These records will contain (a) survey data of boundaries of each property; (b) a unique identification number for each property, which may be linked to a UID number; (c) any record created by an officer of the state or UT government authorised by the laws of that state to make such records; and (d) a record of Title over each property. II. Title Registration Officer and Registration Process The Bill provides for the government to create Title Registration Offices at various places, and for a Title Registration Officer (TRO) to function under the supervision of the Land Titling Authority. The TRO will have powers of a civil court and is charged with the task of creating e a Register of Titles. Steps for the registering of titles include: (a) notification of available land records data by the TRO, (b) invitation to persons with interest in such properties to make objections to the data, and (c) registration of properties by the TRO for which no dispute is brought to his notice in writing. In the case the absoluteness of the title to a property is disputed, the TRO will make an entry into the Register of Titles to that effect and refer the case to the District Land Titling Tribunal (discussed below) III. District Land Titling Tribunal and State Land Titling Appellate Tribunal The Bill proposes to set up a District Land Titling Tribunal, consisting of one or more serving officers not below the rank of Joint Collector / Sub Divisional Magistrate of the District. The government may also establish one or more State Land Titling Appellate Tribunals, to be presided over by serving Judicial Officers in the rank of District Judge. Revisions to the orders of the State Land Titling Appellate Tribunal may be made by a Special Bench of the High Court. The Bill bars civil courts from having jurisdiction to entertain proceedings in respect to matters that the TRO, District Land Titling Tribunal, and State Land Titling Appellate Tribunal are empowered to determine. IV. Completion of Records and Notification When preparation of the Record for whole or part of a specific are is complete, it will be notified. Any person aggrieved by the notified entry in the Register of Titles may file an objection before the District Land Titling Tribunal within three years of the notification. Additionally, the person may file an application with the TRO for an entry to be made in the Register of Titles. The TRO shall do so when the application has been admitted to the Tribunal. Minor errors in the Title of Registers can be rectified through an application to the TRO. V. Register of Titles After completion of records is notified by the Authority, the Register of Titles is prepared and maintained by the Authority. For each property, the Register will include: (a) general description, map, and locational details of the immovable property; (b) descriptive data such as a unique identification number, plot number, total area, built up and vacant area, address, site area, and undivided share in the land; (c) detail of survey entry, provisional title record, conclusive title record and status, mortgage, charges, other rights and interests in the property; (d) details of transfer of the property and past transactions; and (e) disputes pertaining to the property. Entries in the Register of Titles will serve as conclusive evidence of ownership. These entries shall be maintained in electronic form, indemnified, and kept in the public domain.
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
|
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
|
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
|
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
|
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
|
Method of calculation |
Recommendation and its status |
|
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
|
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
|
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
|
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
