The row over Bt Brinjal, a genetically modified version of the plant, provoked the government into imposing a moratorium on the commercial cultivation of the plant in India.  The debate has revolved around issues of economic efficacy, human health, consumer choice and farmers’ rights. Jairam Ramesh, the Minister of State for Environment and Forests, made public his views on the subject, a gist of which is given below:

  • The Genetic Engineering Approvals Committee (GEAC) report recommended commercial cultivation of Bt Brinjal but qualified it by stating that since the issue has important policy implications at the national level, the government should take a final view on the matter.
  • Most of the state governments have expressed concern and have sought to ban the use of Bt Brinjal, or all GM crops.
  • Pesticides have harmful effect on human health and Bt technology is one way of reducing pesticide use.  However, other routes such as non-pesticide pest management can be explored.  For example, about 6 lakh farmers in Andhra Pradesh practice non-pesticide pest management over an area of about 20 lakh acres.
  • Safety is a concern since the kind of tests that have been done is not specific or stringent enough to detect toxins.  Also, tests have only been carried out by the developers of the product, Maharashtra Hybrid Seeds Company Ltd. (Mahyco).  (The results of the biosafety tests are available on the GEAC website).
  • There is no large-scale public funded biotechnology effort toward agriculture, which could compete with Mahyco.  Monsanto is the main producer of Bt Brinjal, and Mahyco is owned to the extent of 26% by Monsanto.
  • While two government owned agricultural universities -- University of Agricultural Sciences, Dharwad and Tamil Nadu Agricultural University (TNAU), Coimbatore – have produced Bt Brinjal along with Mahyco, doubts have been raised about how Bt related research in these universities have been funded.
  • There are apprehensions that there will be diversity loss in the variety of Brinjal if Bt Brinjal is introduced, and this fear cannot be glossed over.
  • While Bt Cotton and Bt Brinjal are not comparable, the introduction of Bt Cotton in India has made India the second largest grower of cotton in the world.  Over 90% of cotton farmers in India cultivate Bt Cotton.  Many farmers support Bt Cotton on economic grounds but some did express doubts.
  • The Central Institute of Cotton Research, Nagpur has developed a Bt cotton variety (Bikaneri Nerma) whose seeds can be kept by farmers for planting during the next season.  The Director of the Institute while expressing support for Bt Brinjal has mentioned that resistance development is a serious issue.  Therefore, more tests that are well-designed, widely-accepted and independently conducted are necessary.
  • The GEAC process has been questioned by  Dr P.M. Bhargava, the Supreme Court nominee on GEAC.  He opposed the recommendation on the ground that all necessary tests had not been carried out before coming to a decision.  The 2006 committee of the GEAC had asked for several tests to be conducted which were not taken into account by the second expert committee.  All GEAC reports (including additional tests) of tests conducted with regard to Bt Brinjal are in the public domain.
  • There is some evidence that the GEAC not followed global regulatory norms of which India is a party.  For example, the Cartagena Protocol on Biosafety, Rio Declaration on Environment and Development etc.
  • Some international scientists have raised doubts about Bt Brinjal and the way the tests were conducted.
  • Many Indian scientists have supported commercialization of Bt Brinjal such as Dr G. Padmanabhan of the Indian Institute of Science; Dr Deepak Pental, Vice Chancellor of Delhi University; and Dr Raj Bhatnagar of the International Centre for Genetic Engineering and Biotechnology, New Delhi.  However, even they have mentioned the need for a statutory body with regulatory powers and R&D capabilities to govern all aspects of GM crops.
  • The Indian Council of Agricultural research and a number of farmer’s groups have come out in support of the move to introduce Bt Brinjal.

In order to understand the process followed by GEAC before giving the green signal to Bt Brinjal, we have made a timeline in which the plant was approved and the bodies involved in the process.

2000-2005 Scientific tests carried out by Mahyco on Bt Brinjal
2006 Mahyco submits bio-safety data to GEAC (regulatory body under the Ministry of Environment and Forests). Seeks permission for large scale trials.
  Supreme Court stops ongoing field trials of GM crops due to a PIL filed by civil society representatives.
2007 The expert committee 1 set up by GEAC, submits its report.  Recommends seven more studies on bio-safety be repeated for reconfirmation of data generated during confined multi-location trials but approves large scale trials.
  Supreme Court lifts ban on GM crop field trials subject to conditions such as isolation distance etc.
  As per GEAC direction, Indian Institute of Vegetable Research (IIVR) takes up the responsibility of large scale trails of Mahyco's Bt Brinjal trials at 10 research institutions across the country in 2007 and 11 in 2008.
2009 Jan: IIVR submits the results of the large scale trails. Due to concerns raised by several stakeholders, GEAC constitutes another expert committee to look into adequacy of biosafety data generated as well as the concerns raised by all stakeholders.
  Oct 8: Expert-committee 2 submits its report. States benefits of Bt Brinjal far outweigh the perceived and projected risks.
  Oct 14: GEAC approves the environmental release of Bt Brinjal containing the event EE1 (with one dissent note from P.M. Bhargava).
  Oct 15: Jairam Ramesh announces a nationwide consultation in January and February of 2010 pending a final decision on this issue.
2010 Jan 13 to Feb 6: Public meetings were organized on the Bt Brinjal issue. The summary of the consultations is available on the Ministry’s website.
  Many states announce ban on commercial cultivation of Bt Brinjal including Uttarakhand, Himachal Pradesh and Karnataka.
  Feb 9: Jairam Ramesh decides to halt the commercialization of Bt Brinjal.

Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts.  It had first recommended these names earlier this year and in August last year, but these appointments were not made.  The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts).  Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases.  As of today, more than four crore cases are pending across all courts in India.   In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.

High vacancy of judges across courts

Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges.  Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually.  However, vacancies persist due to insufficient appointments (see Figures 1 and 2).  Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts). 

Figure 1: Vacancy of judges in High Courts

Figure 2: Vacancy of judges in subordinate courts

image

image

Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS.

As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34).  Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098).  Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges.  In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3).  The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled. 

Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)

image

Source: Vacancy Statement, Department of Justice; PRS.

 

 

 

 

 

 

 

 

 

Appointments of High Court judges are guided by a memorandum of procedure.  As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs.  However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts.  Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court.  No timeline is prescribed for this stage of the appointment process.  In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.

As of today, over 3.6 crore cases are pending before subordinate courts in India.  As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts.  Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4).  Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.

For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.

Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)

image

Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS.

 

How many judges do we need?

The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary.  Lack of adequate number of judges means a greater workload per judge.  Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts.  Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1). 

Table 1: Methods recommended for calculating the required number of judges for subordinate courts

Method of calculation

Recommendation and its status

Judge-to-population ratio: optimum number of judges per million population

The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people.  This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002).  For 2020, the judge-to-population ratio was 21 judges per million population.     Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts.

Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge

The Law Commission of India (2014) proposed this method.  It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions.

Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions

The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method.     It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts.     In 2017, the Supreme Court accepted this model.

Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study

Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts.  It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court.  The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi.

Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.