![](/images/main_logo.png)
Earlier this week, Rajya Sabha passed the Airports Economic Regulatory Authority of India (Amendment) Bill, 2019, and the Bill is now pending in Lok Sabha. The Bill amends the Airports Economic Regulatory Authority of India Act, 2008. The Act established the Airports Economic Regulatory Authority of India (AERA). AERA regulates tariffs and other charges for aeronautical services provided at civilian airports with annual traffic above 15 lakh passengers. It also monitors the performance standard of services across these airports. In this post, we explain the amendments that the Bill seeks to bring in and some of the issues around the functioning of the regulator.
Why was AERA created, and what is its role?
Few years back, private players started operating civilian airports. Typically, airports run the risk of becoming a monopoly because cities usually have one civilian airport which controls all aeronautical services in that area. To ensure that private airport operators do not misuse their monopoly, the need for an independent tariff regulator in the airport sector was felt. Consequently, the Airports Economic Regulatory Authority of India Act, 2008 (AERA Act) was passed which set up AERA.
AERA regulates tariffs and other charges (development fee and passenger service fee) for aeronautical services (air traffic management, landing and parking of aircraft, ground handling services) at major airports. Major airports include civilian airports with annual traffic above 15 lakh passengers. In 2018-19, there were 32 such airports (see Table 1). As of June 2019, 27 of these are being regulated by AERA (AERA also regulates tariffs at the Kannur airport which was used by 89,127 passengers in 2018-19). For the remaining airports, tariffs are determined by the Airports Authority of India (AAI), which is a body under the Ministry of Civil Aviation that also operates airports.
What changes are being proposed in the Bill?
The Bill seeks to do two things:
Definition of major airports: Currently, the AERA Act defines a major airport as one with annual passenger traffic over 15 lakh, or any other airports as notified by the central government. The Bill increases the threshold of annual passenger traffic for major airports to over 35 lakh.
Tariff determination by AERA: Under the Act, AERA is responsible for determining the: (i) tariff for aeronautical services every five years, (ii) development fees, and (iii) passengers service fee. It can also amend the tariffs in the interim period. The Bill adds that AERA will not determine: (i) tariff, (ii) tariff structures, or (iii) development fees, in certain cases. These cases include those where such tariff amounts were a part of the bid document on the basis of which the airport operations were awarded. AERA will be consulted (by the concessioning authority, the Ministry of Civil Aviation) before incorporating such tariffs in the bid document, and such tariffs must be notified.
Why is the Act getting amended?
The Statement of Objects and Reasons of the Bill states that the exponential growth of the sector has put tremendous pressure on AERA, while its resources are limited. Therefore, if too many airports come under the purview of AERA, it will not be able to perform its functions efficiently. If the challenge for AERA is availability of limited resources, the question is whether this problem may be resolved by reducing its jurisdiction (as the Bill is doing), or by improving its capacity.
Will the proposed amendments strengthen the role of the regulator?
When AERA was created in 2008, there were 11 airports with annual passenger traffic over 15 lakh. With increase in passenger traffic across airports, currently 32 airports are above this threshold. The Bill increases the threshold of annual passenger traffic for major airports to over 35 lakh. With this increase in threshold, 16 airports will be regulated by AERA. It may be argued that instead of strengthening the role of the regulator, its purview is being reduced.
Before AERA was set up, the Airports Authority of India (AAI) fixed the aeronautical charges for the airports under its control and prescribed performance standards for all airports and monitored them. Various committees had noted that AAI performed the role of airport operator as well as the regulator, which resulted in conflict of interest. Further, there was a natural monopoly in airports and air traffic control. In order to regulate the growing competition in the airline industry, and to provide a level playing field among different categories of airports, AERA was set up. During the deliberations of the Standing Committee examining the AERA Bill, 2007, the Ministry of Civil Aviation had noted that AERA should regulate tariff and monitor performance standards only at major airports. Depending upon future developments in the sector, other functions could be subsequently assigned to the regulator.
How would the Bill affect the regulatory regime?
Currently, there are 32 major airports (annual traffic above 15 lakh), and AERA regulates tariffs at 27 of these. As per the Bill, AERA will regulate 16 major airports (annual traffic above 35 lakh). The remaining 16 airports will be regulated by AAI. Till 2030-31, air traffic in the country is expected to grow at an average annual rate of 10-11%. This implies that in a few years, the traffic at the other 16 airports will increase to over 35 lakh and they will again fall under the purview of AERA. This may lead to constant changes in the regulatory regime at these airports. The table below provides the current list of major airports:
Table 1: List of major airports in India (as on March 2019)
Airports with annual traffic above 35 lakh | Airports with annual traffic between 15 and 35 lakh | ||||
Ahmedabad |
Goa |
Mumbai |
Amritsar |
Madurai* |
Srinagar |
Bengaluru |
Guwahati |
Patna |
Bagdogra |
Mangalore |
Trichy* |
Bhubaneswar |
Hyderabad |
Pune |
Calicut |
Nagpur |
Varanasi |
Chennai |
Jaipur |
Thiruvananthapuram |
Chandigarh |
Port Blair* |
Vishakhapatnam |
Cochin |
Kolkata |
Coimbatore |
Raipur* |
||
Delhi |
Lucknow |
Indore |
Ranchi* |
* - AERA does not regulate tariffs at these airports currently.
Sources: AAI Traffic News; AERA website; PRS.
Recently, the Cabinet Committee on Economic Affairs approved an increase in the Minimum Support Prices (MSPs) for Kharif crops for the 2018-19 marketing season. Subsequently, the Commission for Agricultural Costs and Prices (CACP) released its price policy report for Kharif crops for the marketing season 2018-19.
The central government notifies MSPs based on the recommendations of the CACP. These recommendations are made separately for the Kharif marketing season (KMS) and the Rabi marketing season (RMS). Post harvesting, the government procures crops from farmers at the MSP notified for that season, in order to ensure remunerative prices to farmers for their produce.
In this blog post, we look at how MSPs are determined, changes brought in them over time, and their effectiveness for farmers across different states.
How are Minimum Support Prices determined?
The CACP considers various factors such as the cost of cultivation and production, productivity of crops, and market prices for the determination of MSPs. The National Commission on Farmers(Chair: Prof. M. S. Swaminathan) in 2006 had recommended that MSPs must be at least 50% more than the cost of production. In this year’s budget speech, the Finance Minister said that MSPs would be fixed at least at 50% more than the cost of production.
The CACP calculates cost of production at three levels: (i) A2, which includes cost of inputs such as seeds, fertilizer, labour; (ii) A2+FL, which includes the implied cost of family labour (FL); and (iii) C2, which includes the implied rent on land and interest on capital assets over and above A2+FL.
Table 1 shows the cost of production as calculated by the CACP and the approved MSPs for KMS 2018-19. For paddy (common), the MSP was increased from Rs 1,550/quintal in 2017-18 to Rs 1,750/quintal in 2018-19. This price would give a farmer a profit of 50.1% on the cost of production A2+FL. However, the profit calculated on the cost of production C2 would be 12.2%. It has been argued that the cost of production should be taken as C2 for calculating MSPs. In such a scenario, this would have increased the MSP to Rs 2,340/quintal, much above the current MSP of Rs 1,750/quintal.
Which are the major crops that are procured at MSPs?
Every year, MSPs are announced for 23 crops. However, public procurement is limited to a few crops such as paddy, wheat and, to a limited extent, pulses as shown in Figure 1.
The procurement is also limited to a few states. Three states which produce 49% of the national wheat output account for 93% of procurement. For paddy, six states with 40% production share have 77% share of the procurement. As a result, in these states, farmers focus on cultivating these crops over other crops such as pulses, oilseeds, and coarse grains.
Due to limitations on the procurement side (both crop-wise and state-wise), all farmers do not receive benefits of increase in MSPs. The CACP has noted in its 2018-19 price policy report that the inability of farmers to sell at MSPs is one of the key areas of concern. Farmers who are unable to sell their produce at MSPs have to sell it at market prices, which may be much lower than the MSPs.
How have MSPs for major crops changed over time?
Higher procurement of paddy and wheat, as compared to other crops at MSPs tilts the production cycle towards these crops. In order to balance this and encourage the production of pulses, there is a larger proportional increase in the MSPs of pulses over the years as seen in Figure 2. In addition to this, it is also used as a measure to encourage farmers to shift from water-intensive crops such as paddy and wheat to pulses, which relatively require less water for irrigation.
What is the effectiveness of MSPs across states?
The MSP fixed for each crop is uniform for the entire country. However, the production cost of crops vary across states. Figure 3 highlights the MSP of paddy and the variation in its cost of production across states in 2018-19.
For example, production cost for paddy at the A2+FL level is Rs 702/quintal in Punjab and Rs 2,102/quintal in Maharashtra. Due to this differentiation, while the MSP of Rs 1,750/quintal of paddy will result in a profit of 149% to a farmer in Punjab, it will result in a loss of 17% to a farmer in Maharashtra. Similarly, at the C2 level, the production cost for paddy is Rs 1,174/quintal in Punjab and Rs 2,481/quintal in Maharashtra. In this scenario, a farmer in Punjab may get 49% return, while his counterpart in Maharashtra may make a loss of 29%.
Figure 4 highlights the MSP of wheat and the variation in its cost of production across states in 2017-18. In the case of wheat, the cost of production in Maharashtra and West Bengal is much more than the cost in rest of the states. At the A2+FL level, the cost of production in West Bengal is Rs 1,777/quintal. This is significantly higher than in states like Haryana and Punjab, where the cost is Rs 736/quintal and Rs 642/quintal, respectively. In this case, while a wheat growing farmer suffers a loss of 2% in West Bengal, a farmer in Haryana makes a profit of 136%. The return in Punjab is even higher at 1.5 times or more the cost of production.