![](/images/main_logo.png)
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021) |
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
Method of calculation |
Recommendation and its status |
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
The Union Cabinet approved the implementation of Seventh Pay Commission recommendations yesterday. The Commission was tasked with reviewing and proposing changes to the pay, pension and efficiency of government employees. These recommendations will apply to 33 lakh central government employees, in addition to 14 lakh armed forces personnel and 52 lakh pensioners. This will take effect from January 1, 2016.
Pay, Allowances and Pension of central government employees In relation to an employee, the Commission proposed to increase (i) the minimum salary to Rs 18,000 per month, and (ii) the maximum salary to Rs 2,50,000 per month. It also recommended moving away from the existing system of pay bands and grade pay, which is used to determine an employee’s salary. Instead, it proposed a new pay matrix which will take into account the hierarchy of employees, and their pay progression during the course of employment. The Commission also suggested that this matrix should be reviewed periodically, with a frequency of less than 10 years. The Pay Commission also suggested a linkage between performance and remuneration of an employee. For this, it proposed the introduction of performance related pay which will be based on an annual appraisal of the employee. In addition, it recommended that annual increments of an employee should be withheld, if he is unable to meet the benchmark required for regular promotion or career progression. The Commission also sought to abolish or merge some of the allowances that may be given to employees by various government departments. It suggested that, of the 196 allowances that exist, 52 should be abolished and 36 should either be merged under existing heads, or be included under proposed allowances. Some of these allowances involved payment of a meagre amount of close to Rs 100 per month. In addition, the rates of House Rent Allowance (HRA) were revised. The Commission proposed a methodology to increase the HRA rates every time the Dearness Allowance given to employees increased to 50% or 100%. Dearness Allowance is given to employees in lieu of increases in the cost of living, on account of inflation. The Commission had also proposed a new methodology for computing pension for pensioners who retired before January 1, 2016. This is aimed at bringing parity between past and current pensioners. As part of the new methodology, two options for calculation of pension have been prescribed, and the pensioner may opt for either one. Financial Impact on the government
The implementation of the Seventh Pay Commission recommendations is expected to cost the government Rs 1,02,100 crore. Of this amount, 72% will be borne by the central government, and 28% by the railways. As a result, the overall expenditure is expected to increase by 23.6%, with a 16% increase in expenses on pay, 63% in allowances and 24% in pension. Addressing the issue of vacancy
As of 2014, the central government had a job vacancy of 18.5%.[i] These vacancies may need to be filled or abolished, if required, to reduce redundancy.[ii] It may be noted that the Second Administrative Reforms Commission had observed that reducing the number of government employees is necessary for modern and professional governance. Further, it had expressed concern that the increasing expenditure on salaries of government employees may be at the cost of investment in priority areas such as infrastructure development and poverty alleviation.[iii] Inducting specialised personnel in the government The Second Administrative Reforms Commission had also observed that some senior positions in the central government require specific skill sets (including technical and administrative know-how).[iii] One way of developing these skill-sets is to recruit personnel directly into these departments so that they can over a period of time develop the required skills. For example, personnel from the Central Engineering Service (Roads) may aspire and be qualified to hold senior positions in the Ministry of Road, Transport and Highways or a body like the National Highways Authority of India. However, another view is that special skill-sets may be inducted in the government through lateral entry of experts from outside government. This will allow for widening of the pool of candidates and greater competition for these positions.[iii] The Second Administrative Reforms Commission had also recommended that senior positions in the government should be open to all services. The last Pay Commission’s recommendations, in 2008, led to an increased demand in the automobile, consumer products and real estate related sectors. With the Seventh Pay Commission’s recommendations expected to take effect from January 1, 2016, their impact on the economy and the consumer market will become known in due course of time. [i] Report of the Seventh Central Pay Commission, Ministry of Finance, 2015 http://finmin.nic.in/7cpc/7cpc_report_eng.pdf. [ii] “Union govt has 729,000 vacancies: report”, Live Mint, November 30, 2015, http://www.livemint.com/Home-Page/X6U6xFe5oR2pW4simMmAhK/Union-govt-has-729000-vacancies-report.html. [iii] 10th and 13th Reports of the Second Administrative Reforms Commission, 2008 and 2009.