![](/images/main_logo.png)
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021) |
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
Method of calculation |
Recommendation and its status |
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
Recently, the Karnataka legislature passed the Bruhat Bengaluru Mahanagara Palike (BBMP) Bill, 2020. BBMP is the municipal corporation of the Greater Bengaluru metropolitan area. The BBMP Act, 2020 seeks to improve decentralisation, ensure public participation, and address certain administrative and structural concerns in Bengaluru. In this blog, we discuss some common issues in urban local governance in India, in the context of Bengaluru’s municipal administration.
The Constitution (74th Amendment) Act, 1992 provided for the establishment of urban local bodies (ULBs) (including municipal corporations) as institutions of local self-government. It also empowered state governments to devolve certain functions, authority, and power to collect revenue to these bodies, and made periodic elections for them compulsory.
Urban governance is part of the state list under the Constitution. Thus, the administrative framework and regulation of ULBs varies across states. However, experts have highlighted that ULBs across India face similar challenges. For instance, ULBs across the country lack autonomy in city management and several city-level functions are managed by parastatals (managed by and accountable to the state). Several taxation powers have also not been devolved to these bodies, leading to stressed municipal finances. These challenges have led to poor service delivery in cities and also created administrative and governance challenges at the municipal level.
BBMP was established under the Karnataka Municipal Corporation Act, 1976 (KMC Act). The BBMP Act, 2020 replaces provisions of the KMC Act, 1976 in its application to Bengaluru. It adds a new level of zonal committees to the existing three-tier municipal structure in the city, and also gives the Corporation some more taxation powers. Certain common issues in urban local governance in India, with provisions related to them in the BBMP Act, 2020 are given below.
Functional overlap with parastatals for key functions
The Constitution (74th Amendment) Act, 1992 empowered states to devolve the responsibility of 18 functions including urban planning, regulation of land use, water supply, and slum upgradation to ULBs. However, in most Indian cities including Bengaluru, a majority of these functions are carried out by parastatals. For example, in Bengaluru, the Bengaluru Development Authority is responsible for land regulation and the Karnataka Slum Clearance Board is responsible for slum rehabilitation.
The BBMP Act, 2020 provides the Corporation with the power and responsibility to prepare and implement schemes for the 18 functions provided for in the Constitution (74th Amendment) Act, 1992. However, it does not provide clarity if new bodies at the municipal level will be created, or the existing parastatals will continue to perform these functions and if so, whether their accountability will shift from the state to the municipal corporation.
This could create a two-fold challenge in administration. First, if there are multiple agencies performing similar functions, it could lead to a functional overlap, ambiguity, and wastage of resources. Second, and more importantly, the presence of parastatals that are managed by and accountable to the state government leads to an erosion of the ULB’s autonomy. Several experts have highlighted that this lack of autonomy faced by municipal corporations in most Indian cities leads to a challenge in governance, effective service delivery, and development of urban areas.
An Expert Committee on Urban Infrastructure (2011) had recommended that activity mapping should be done for the 18 functions. Under this, functions in the exclusive domain of municipalities and those which need to be shared with the state and the central government must be specified. Experts have also recommended that the municipality should be responsible for providing civic amenities in its jurisdiction and if a parastatal exercises a civic function, it should be accountable to the municipality.
Stressed municipal finances
Indian ULBs are amongst the weakest in the world in terms of fiscal autonomy and have limited effective devolution of revenue. They also have limited capacity to raise resources through their own sources of revenue such as property tax. Municipal revenue in India accounts for only one percent of the GDP (2017-18). This leads to a dependence on transfers by the state and central government.
ULBs in states like Uttar Pradesh, Uttarakhand, Bihar, Jharkhand, Rajasthan, and Haryana are in poor financial condition. This has been attributed to limited powers to raise revenue and levy taxes, and problems in the management of existing resources. For instance, the finances of Bihar’s ULBs were assessed to be poor because of: (i) delays in release of grants, (ii) inadequate devolution of funds, and (iii) delays in revision of tax rates and assessments of landholdings.
In comparison, Karnataka ranks high among Indian states in key indicators for fiscal capacity like collection of property taxes, grants from Central Finance Commissions, and state government transfers. The BBMP Act, 2020 further increases the taxation powers of the Corporation, by allowing it to impose taxes on professions and entertainment.
Experts have recommended that the central government and the respective state government should provide additional funds and facilitate additional funding mechanisms for ULBs to strengthen their finances. The revenue of ULBs can be augmented through measures including assignment of greater powers of taxation to the ULBs by the state government, reforms in land and property-based taxes (such as the use of technology to cover more properties), and issuing of municipal bonds (debt instruments issued by ULBs to finance development projects).
Powers of elected municipal officials
The executive power with state-appointed municipal Commissioners and elected municipal officers differs across states. States like Tamil Nadu and Gujarat, and cities like Chennai and Hyderabad vest the executive power in the Commissioner. In contrast, the executive power of the Corporation is exercised by a Mayor-in council (consisting of the Mayor and up to 10 elected members of the Corporation) in Kolkata and Madhya Pradesh. This is unlike large metropolitan cities in other countries like New York and London, where elected Mayors are designated as executive heads. Experts have noted that charging Commissioners with executive power diluted the role of the Mayor and violated the spirit of self-governance.
Under the BBMP Act, 2020, both the elected Mayor and the state-appointed Chief Commissioner exercise several executive functions. The Mayor is responsible for approving contracts and preparing the budget estimate for the Corporation. He is also required to discharge all functions assigned to him by the Corporation. On the other hand, executive functions of the Chief Commissioner include: (i) selling or leasing properties owned by the Corporation, and (ii) regulating and issuing instructions regarding public streets.
The Expert Committee on Urban Infrastructure (2011) has recommended that the Commissioner should act as a city manager and should be recruited through a transparent search-cum-selection process led by the Mayor. A Model Municipal law, released by the Urban Development Ministry in 2003, provided that the executive power should be exercised by an Empowered Standing Committee consisting of the Mayor, Deputy Mayor, and seven elected councillors.
Management of staff and human resources
Experts have noted that municipal administration in India suffers from staffing issues which leads to a failure in delivering basic urban services. These include overstaffing of untrained manpower, shortage of qualified technical staff and managerial supervisors, and unwillingness to innovate in methods for service delivery.
The BBMP Act, 2020 provides that the Corporation may make bye-laws for the due performance of duties by its employees. However, it does not mention other aspects of human resource management such as recruitment and promotion. A CAG report (2020) looking at the implementation of the Constitution (74th Amendment) Act, 1992 in Karnataka has observed that the power to assess municipal staff requirements, recruiting such staff, and determining their pay, transfer and promotion vests with the state government. This is in contrast with the recommendations of several experts who have suggested that municipalities should appoint their personnel to ensure accountability, adequate recruitment, and proper management of staff.
Other states including Kerala, Maharashtra and Tamil Nadu also allow the state governments to regulate recruitment and staffing for ULBs. In cities like Mumbai, and Coimbatore, and some states like Gujarat and Madhya Pradesh, while the recruitment process is conducted by the respective municipal corporations, the final sanction for hiring staff lies with the state government.