Over the last few days, the retail prices of petrol and diesel have touched an all-time high.  In Delhi, petrol was selling at 74.6/litre on April 25, 2018, while diesel was at 66/litre.

Petroleum products are used as raw materials in various sectors and industries such as transport and petrochemicals.  These products may also be used in factories to operate machinery or generators.  Any fluctuation in the price of petrol and diesel impacts the production and transport costs of various items.  When compared to other neighbouring countries, India has the highest prices for petrol and diesel.

Note: Prices as on April 1, 2018. Prices for India pertain to Delhi. Sources: Petroleum Planning and Analysis Cell, Ministry of Petroleum and Natural Gas; PRS.

Note: Prices as on April 1, 2018. Prices for India pertain to Delhi.
Sources: Petroleum Planning and Analysis Cell, Ministry of Petroleum and Natural Gas; PRS.

How is the price of petrol and diesel fixed?

Historically, the price of petrol and diesel in India was regulated, i.e. the government was involved in the deciding the retail price.  The government deregulated the pricing of petrol in 2010 and diesel in 2014.  This allowed oil marketing companies to determine the price of these products, and revise them every fortnight.

Starting June 16, 2017, prices for petrol and diesel are revised on a daily basis.  This was done to with the idea that daily revision will reduce the volatility in retail prices, and protect the consumer against sharp fluctuations.  The break-up of retail prices of petrol and diesel in Delhi on April 25, 2018 can be found below.  As seen in the table, over 50% of the retail price of petrol comprises central and states taxes and the dealer’s commission.  In case of diesel, this amount is close to 40%.

Table 1: Break-up of petrol and diesel prices in Delhi (on April 25, 2018)

Component

Petrol

Diesel

Rs/litre % of retail price Rs/litre

% of retail price

Price Charged to Dealers 35.7 48% 38.4 58%
Excise Duty (levied by centre) 19.5 26% 15.3 23%
Dealer Commission 3.6 5% 2.5 4%
VAT (levied by state) 15.9 21% 9.7 15%
Retail Price 74.6 100% 65.9 100%
Source: Price Build-up of Petrol and Diesel at Delhi effective April 25, 2018; Indian Oil Corporation Limited.

 

Does India produce enough petroleum to support domestic consumption?

India imports 84% of the petroleum products consumed in the country.  This implies that any change in the global prices of crude oil has a significant impact on the domestic price of petroleum products.  In 2000-01, net import of petroleum products constituted 75% of the total consumption in the country.  This increased to 95% in 2016-17.  The figure below shows the amount of petroleum products consumed in the country, and the share of imports.

Note: Production is the difference between the total consumption in the country and the net imports. Sources: Petroleum Planning and Analysis Cell; PRS.

Note: Production is the difference between the total consumption in the country and the net imports.
Sources: Petroleum Planning and Analysis Cell; PRS.

What has been the global trend in crude oil prices? How has this impacted prices in India?

Over the last five years, the global price of crude oil (Indian basket) has come down from USD 110 in January 2013 to USD 64 in March 2018, having touched a low of USD 28 in January 2016.

While there has been a 42% drop in the price of global crude over this five-period, the retail price of petrol in India has increased by 8%.  During this period, the retail price of diesel increased by 33%.  The two figures below show the trend in prices of global crude oil and retail price of petrol and diesel in India, over the last five years.

Petrol price

Diesel price

 

Note: Subsidy indicated in the graphs is notional.  While calculating the subsidy amount, other factors such as cost of domestic inputs will also have to be accounted.  Global Crude Oil Price is for the Indian basket.  Figures reflect average monthly retail price of petrol and diesel in Delhi.
Sources: Petroleum Planning and Analysis Cell; Indian Oil Corporation Limited; PRS.

 

How has the excise duty on petrol and diesel changed over the last few years?

Under the Constitution, the central government has the powers to tax the production of petroleum products, while states have the power to tax their sale.  Petroleum has been kept outside the purview of the Goods and Services Tax (GST), till the GST Council decides.

Over the years, the central government has used taxes to prevent sharp fluctuations in the retail price of diesel and petrol.  In the past, when global crude oil prices have increased, duties have been cut.  Since 2014, as global crude oil prices declined, excise duties have been increased.

Sources: Petroleum Planning and Analysis Cell; PRS.

Sources: Petroleum Planning and Analysis Cell; PRS.

 

As a consequence of the increase in duties, the central government’s revenue from excise on petrol and diesel increased annually at a rate of 46% between 2013-14 and 2016-17.  During the same period, the total sales tax collections of states (from petrol and diesel) increased annually by 9%.  The figure below shows the trend in overall collections of the central and state governments from petroleum (including receipts from taxes, royalties, and dividends).

 

Notes: Data includes tax collections (from cesses, royalties, customs duty, central excise duty, state sales tax, octroi, and entry tax, among others), dividends paid to the government, and profit on oil exploration. Data sources: Petroleum and Planning Analysis Cell; Central Board of Excise and Customs; Indian Oil Corporation Limited; PRS.

Notes: Data includes tax collections (from cesses, royalties, customs duty, central excise duty, state sales tax, octroi, and entry tax, among others), dividends paid to the government, and profit on oil exploration.
Data sources: Petroleum and Planning Analysis Cell; Central Board of Excise and Customs; Indian Oil Corporation Limited; PRS.

Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts.  It had first recommended these names earlier this year and in August last year, but these appointments were not made.  The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts).  Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases.  As of today, more than four crore cases are pending across all courts in India.   In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.

High vacancy of judges across courts

Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges.  Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually.  However, vacancies persist due to insufficient appointments (see Figures 1 and 2).  Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts). 

Figure 1: Vacancy of judges in High Courts

Figure 2: Vacancy of judges in subordinate courts

image

image

Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS.

As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34).  Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098).  Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges.  In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3).  The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled. 

Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)

image

Source: Vacancy Statement, Department of Justice; PRS.

 

 

 

 

 

 

 

 

 

Appointments of High Court judges are guided by a memorandum of procedure.  As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs.  However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts.  Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court.  No timeline is prescribed for this stage of the appointment process.  In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.

As of today, over 3.6 crore cases are pending before subordinate courts in India.  As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts.  Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4).  Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.

For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.

Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)

image

Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS.

 

How many judges do we need?

The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary.  Lack of adequate number of judges means a greater workload per judge.  Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts.  Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1). 

Table 1: Methods recommended for calculating the required number of judges for subordinate courts

Method of calculation

Recommendation and its status

Judge-to-population ratio: optimum number of judges per million population

The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people.  This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002).  For 2020, the judge-to-population ratio was 21 judges per million population.     Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts.

Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge

The Law Commission of India (2014) proposed this method.  It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions.

Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions

The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method.     It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts.     In 2017, the Supreme Court accepted this model.

Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study

Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts.  It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court.  The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi.

Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.