This month, PRS Legislative Research is 5 years old! The objective when we started out was to make the legislative process in India better informed, more transparent and participatory.  From what started off as an idea, we believe we have made some progress towards our objective. -       About 250 MPs across political parties have reached out to PRS for inputs on a range of issues that have come up in Parliament.  In addition, there are a number of MPs who use PRS material for their preparation in Parliament, even though they have not contacted PRS for further inputs. -       PRS has increasingly become a resource for the media as well.  Over the past year, PRS has been cited on nearly 400 occasions by leading newspapers and websites as the source of information about legislation and Parliament. These are some of the milestones that we feel happy to have reached.  But I want to really share are some of the learnings that we have had over these years. The first thing that we have learned is that many of us carry so many wrong perceptions about our MPs. Most of us don’t know that more than 80 percent of our MPs have college degrees.  Most of us don’t know that the average attendance rate in Parliament is close to 80 percent in the past year.  Most of us don’t know that Parliament has worked for more than 90 percent of the scheduled time in recent sessions, despite the undesirable disruptions in Parliament. There is a lot that is wrong with our politics, but we hope that some of these facts throw light about some lesser known aspects about our MPs. Laws are made for the really long term! That seems obvious, when we see examples such as our Indian Penal Code which was made in 1860, and the Land Acquisition Act that has haunted our country in recent years was passed in 1894.  And these are just some examples.  The fact is that if we do not debate our laws when they are being made, and citizens do not engage and provide inputs to this process, then we will be stuck with any issues that these laws might have for the next 100 years or more.  So it is critical to get the laws as close to ‘right’ as possible when they are being passed. It is not obvious to most people that so many MPs put in significant effort to engage effectively in Parliament. Clearly, there is a selection bias, statistically speaking – I am talking of MPs who have reached out to us.  Despite this selection bias, the point is that there are a number of MPs who take their work in Parliament seriously, even though they know that much of the work they do in Parliament has almost no bearing on their re-election prospects.  (By the way, in most informal polls that I have done when I meet with groups of people, most do not know the role of an MP – even amongst some of the well educated groups.) Why do so many MPs still work hard to prepare for their work in Parliament, despite knowing that this work has no bearing on their re-election prospects? On this, we can only hypothesize.  There are many MPs who understand their role as legislators and take it very seriously.  There are MPs who feel that making a good point on an issue on the floor of Parliament is a way to establish their grasp of a certain issue to their colleagues in Parliament, but also to the larger world.  For some others, it is a signalling device to their party colleagues about their interest and expertise in a certain subject area.  And we have had MPs who have said, that they feel very good when other MPs, especially from other parties, compliment them for making a good point.  All of these sound like good positive reasons for many MPs to want to be well prepared to speak in Parliament. We have begun to appreciate that the role of the MP in Parliament is very challenging. I can point to at least three reasons, which are independent of how educated or capable an MP might be: (a) The range of subjects in Parliament is so wide that no individual, however intelligent, can be fully conversant with all the subjects being discussed.  (b) MPs have no research staff whatsoever, and are expected to do all of their preparatory work on their own, and (c) The constituency pressure on the MPs is often very high, making it difficult for them to pay adequate attention to their work in Parliament. We most certainly want more from our MPs and our Parliament. We want our MPs to meet for more days, find better ways to raise issues in Parliament than to disrupt proceedings, debate in more detail the laws that they pass.  But what we have learned is that we cannot throw the baby out with the bath water.  So, I am not suggesting that we can’t do better or that our MPs or our Parliament are perfect.  The only way we will have a better Parliament is if we engage.  And more people engage – from all walks of life.  Policy making is not the exclusive preserve of either the expert or the policy maker.  The policy process can be greatly strengthened if we participate in the process and ensure that our MPs know that we want effective laws to govern us and our children. Parliament can be made more effective by addressing some of the current bottlenecks. And some of these issues are not even difficult to fix.  For example, can we have more people in the committee staff to support the work of the standing committees in Parliament so they can cover more ground in any given year?  Can we have qualified research staff working for MPs so that they can go better prepared for Parliament?  (Our Legislative Assistants to MPs – LAMPs programme has shown that it is hugely rewarding for young legislative assistants and the MPs if such a platform is created.)  Can we have recorded voting on all legislative votes, instead of voice votes – the electronic button system is already in place to do this!  These are just some examples… and we at PRS have a laundry list of ideas for strengthening Parliament – with varying degrees of difficulty.  We have raised some of these issues in our Annual Conference of Effective Legislatures, and will continue to do so in the years ahead. A very BIG thanks to each of you for making PRS possible over these past five years… We hope that you will continue to bless and support us in the years ahead to help shape a more robust policy making process in India. PRS PRODUCTS The Legislative Briefs are our flagship product.  Each Brief analyses one Bill pending in Parliament.  These are no longer than 6 pages and are sent to all MPs.  We then get calls from MPs asking for more information/ clarification. Since earlier this year PRS has begun a Wednesday morning Policy Dialogue series exclusively for MPs.  These are widely attended by MPs across parties. PRS is the knowledge partner to brief MPs in the Thursday morning Bill briefing sessions organised by the Constitution Club. PRS has reached out to about 1000 journalists across the country, through journalist workshops and direct engagement. PRS has started the Legislative Assistants to MPs (LAMPs) programme as a pilot initiative.  Under the programme, participating MPs get a trained legislative assistant for a period of three Parliament sessions. PRS produces Primers to demystify Parliamentary process for citizens. These are widely used in our interactions with civil society groups. The Vital Stats series is a crisp two page document that often highlights interesting aspects of Parliament.  They are very popular with journalists. PRS has nearly 1000 fans on Facebook and 2000 followers on Twitter, including some MPs. PRS has a Session Alert at the beginning of each session of Parliament.  On the last day of each session, PRS releases two reports on the just concluded session: Parliament Session Wrap and Plan vs. Performance. PRS hosts an Annual Conference of Effective Legislatures each year to highlight certain aspects of the functioning of Parliament. PRS has compiled a free online database of all state laws across the country.  This effort is the first effort of its kind in India. The PRS website has become an important resource for anyone tracking the Indian Parliament both within the country and abroad.

Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts.  It had first recommended these names earlier this year and in August last year, but these appointments were not made.  The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts).  Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases.  As of today, more than four crore cases are pending across all courts in India.   In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.

High vacancy of judges across courts

Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges.  Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually.  However, vacancies persist due to insufficient appointments (see Figures 1 and 2).  Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts). 

Figure 1: Vacancy of judges in High Courts

Figure 2: Vacancy of judges in subordinate courts



Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS.

As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34).  Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098).  Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges.  In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3).  The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled. 

Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)


Source: Vacancy Statement, Department of Justice; PRS.










Appointments of High Court judges are guided by a memorandum of procedure.  As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs.  However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts.  Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court.  No timeline is prescribed for this stage of the appointment process.  In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.

As of today, over 3.6 crore cases are pending before subordinate courts in India.  As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts.  Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4).  Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.

For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.

Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)


Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS.


How many judges do we need?

The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary.  Lack of adequate number of judges means a greater workload per judge.  Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts.  Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1). 

Table 1: Methods recommended for calculating the required number of judges for subordinate courts

Method of calculation

Recommendation and its status

Judge-to-population ratio: optimum number of judges per million population

The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people.  This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002).  For 2020, the judge-to-population ratio was 21 judges per million population.     Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts.

Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge

The Law Commission of India (2014) proposed this method.  It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions.

Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions

The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method.     It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts.     In 2017, the Supreme Court accepted this model.

Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study

Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts.  It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court.  The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi.

Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.