As of April 17, Madhya Pradesh has 1,120 confirmed cases of COVID-19 - the fifth-highest among all states in India. The Government of Madhya Pradesh issued one of its initial COVID-19 related orders around January 28, 2020, advising healthcare workers to use appropriate protective gear when examining patients from Wuhan, China. Since then, the government has taken several actions to contain the spread and impact of COVID-19. In this blog, we look at key measures taken so far.
Figure 1: Day-wise COVID-19 cases in Madhya Pradesh
Early stages: Focus on screening international travellers
On January 28, the state government issued directions to monitor international travellers from specified countries, test and maintain surveillance on those who are symptomatic. A further order required district administrators to monitor and report on all passengers who arrived from China between December 31, 2019 and January 29, 2020. While efforts were largely focused on screening and testing, the first quarantine restrictions for symptomatic travellers from China, entering India after January 15, were imposed on January 31. Those leaving quarantine were subsequently kept under surveillance and their health conditions reported on for a period of 14 days. By February 13, a constant presence of a medical team at the airport was required to test foreign passengers from an increasing list of countries and send daily reports.
February and early March: Improving public health capacity, restricting social gatherings
The next steps from the government were aimed towards adapting the public health infrastructure to handle the evolving situation. Following are some of the steps taken in this regard:
As the number of cases in India increased through March, the MP government turned focus and issued orders directly concerning their citizens. Several measures were undertaken to spread awareness about COVID-19 and implement social distancing.
March 21 Onwards
On March 21, MP reported four cases of COVID-19. On March 23, the government released the Madhya Pradesh Epidemic Diseases, COVID-19 Regulations 2020 to prevent the spread of COVID-19 in the state. These regulations specify special administrative powers and protocol for hospitals (government and private) to follow while treating COVID-19 patients. These regulations are valid for one year. Over and above general instructions to maintain social distancing and personal hygiene, the government has undertaken specific measures to: (i) increase healthcare capacity, (ii) institute welfare protection for the economically vulnerable population, (iii) strengthen the administrative structure and data collection, and (iv) ensure supply of essential goods and services. These measures include-
Healthcare measures
Welfare measures
Administrative measures
Supply of essential goods and services
For more information on the spread of COVID-19 and the central and state government response to the pandemic, please see here.
The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.
In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.
What is the inflation targeting framework, and what happens if inflation is persistently high?
In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.
As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.
Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).
Figure 1: Consumer price index (year-on-year; in percentage)
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.
The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.
Breaking down the Consumer Price Index and the Wholesale Price Index
Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.
|
Table 1: Assigned weights for the calculation of CPI
Sources: MOSPI; PRS. |
Table 2: Average inflation of some CPI components
Sources: Database on Indian Economy, RBI; PRS. |
CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.
|
Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal. WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil. |
Table 3:Assigned weights for the
Sources: Ministry of Commerce and Industry; PRS. |
Why has WPI inflation been consistently above CPI inflation?
Movements in the WPI have an impact on the CPI. For almost a year and half, CPI inflation has remained below WPI inflation. However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag. This is because retail prices include taxes (as a percentage of price), while wholesale prices do not. Additionally, some of the goods in WPI act as inputs in the goods considered in CPI. An increase in input prices would lead to higher retail prices after a time lag.
We discuss possible reasons for why CPI has remained below WPI for a year and a half.
Figure 2: Consumer Price Index and Wholesale Price Index
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
Composition of indices
As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022. They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.
The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.
