In the last decade, the government has implemented several schemes to address issues related to urbanisation and aid the process of urban development. One of the schemes is the Smart Cities Mission, which intends to take advantage of the developments in information technology in developing the urban development strategy, across 100 cities. Last week the government announced the list of 9 new Smart Cities, taking the total to 99. In light of this, we look at the Smart Cities Mission and a few issues with it.
What is a Smart City?
The primary objective of the Mission is to develop cities that provide core infrastructure and give a decent quality of life to its citizens, a clean and sustainable environment, and apply ‘smart’ solutions.
However, the Mission document does not provide one definition of a Smart City. Instead it allows cities to come up with their own solutions of what they identify as a Smart City. The guidelines suggest that the core infrastructure elements in a Smart City will include: (i) adequate water supply, (ii) assured electricity supply, (iii) sanitation, including solid waste management, (iv) efficient urban mobility and public transport, (v) affordable housing, (vi) robust IT connectivity, and (vii) good governance. ‘Smart’ solutions may include (i) energy efficient buildings, (ii) electronic service delivery, (iii) intelligent traffic management, (iv) smart metering, (v) citizen engagement, etc.
How were the Smart Cities selected?
The Mission was introduced in the form of a competition, called the Smart City challenge. The first stage was in July 2015 when states nominated their cities for the competition. In August 2015, the Ministry of Urban Development selected 100 of those cities to participate in the competition. These cities were required to develop their smart city plans (SCPs) and compete against each other. The SCPs were evaluated on the basis of the solutions, the processes followed, the feasibility and cost effectiveness of the plans, and citizen engagement. Over the last 2 years, the Ministry has announced winner cities in batches. So far, 99 cities have been selected under the Mission.
What information do these SCPs contain?
The cities had to prepare their SCPs with two primary strategic components: (i) area-based development, and (ii) pan-city development. The area-based development would cover a particular area of the city, and could have either a redevelopment model, or be a completely new development. Pan-city development would envisage application of certain smart solutions across the city to the existing infrastructure.
Each city had to formulate its own concept, vision, mission and plan for a Smart City that was appropriate to its local context and resources. The Ministry of Urban Development provided technical assistance, through consultancy firms, to cities for helping them prepare these strategic documents.
How will the Mission be implemented?
The Mission will be implemented at the city level by a Special Purpose Vehicle (SPV). The SPV will plan, approve, release funds, implement, manage, monitor, and evaluate the Smart City development projects.
The SPV will be a limited company incorporated under the Companies Act, 2013 at the city-level. It will be chaired by the Collector/ Municipal Commissioner of the Urban Development Authority. The respective state and the Urban Local Body (ULB or municipality) will be the promoters in this company having 50:50 equity shareholding.
How are the Plans getting financed?
The Mission will be operated as a Centrally Sponsored Scheme. The central government will provide financial support of up to Rs 48,000 crore over five years, that is, an average of Rs 500 crore per city. The states and ULBs will have to contribute an equal amount. The central government allocated Rs 4,000 crore towards the Mission in the 2017-18 budget.
Since funding from the government will meet only a part of the funding required, the rest will have to be raised from other sources including: (i) states/ ULBs own resources from collection of user fees, land monetization, etc., (ii) innovative finance mechanisms such as municipal bonds, (iii) leverage borrowings from financial institutions (such as banks), and (iv) the private sector through Public Private Partnerships (PPPs).
The total cost of projects proposed under the various SCPs of the 90 winner cities is Rs 1.9 lakh crore. About 42% of this amount will come from central and state funding, 23% through private investments and PPPs, and 19% through convergence with other schemes (such as HRIDAY, AMRUT, Swachh Bharat-Urban). The remaining will be generated by the cities through the levy of local taxes, and user fees.
What are some of the issues to consider?
Financial capacity of cities: Under the Mission, cities have to generate additional revenue through various sources including market borrowings, PPPs, and land monetization. The High Powered Expert Committee on Indian Urban Infrastructure and Services (HPEC) had observed that ULBs in India are among the weakest in the world, both in terms of capacity to raise resources and financial autonomy. Even though ULBs have been getting higher allocations from the centre and states, and tax devolution to them has increased, their own tax bases are narrow. Further, owing to their poor governance and financial situation, ULBs find it difficult to access external financing.
Such a situation may pose problems when implementing the Mission, where the ULBs have to raise a significant share of the revenue through external sources (PPPs, market borrowings). For example, the Bhubaneswar Smart City Plan has a total project cost of Rs 4,537 crore (over five years), while the city’s annual budget for 2014-15 was Rs 469 crore.
In order to improve the finances of the ULBs, committees have made various recommendations, which include:
The government has recently introduced a few policies and mechanisms to address municipal financing. Examples include value capture financing through public investments in infrastructure projects, and a credit rating system for cities. In June 2017, the Pune Municipal Corporation raised Rs 200 crore by issuing municipal bonds.
Technical capacity of the ULBs: The Smart Cities Mission seeks to empower ULBs to raise their own revenue, and also lays emphasis on the capacity building of ULBs. The HPEC had observed that municipal administration has suffered due to: (i) presence of untrained and unskilled manpower, and (ii) shortage of qualified technical staff and managerial supervisors. It had recommended improving the technical capacity of ULBs by providing technical assistance to state governments, and ULBs in planning, financing, monitoring, and operation of urban programmes. The central government had allocated Rs 10.5 crore towards the capacity building component of the Mission in 2017-18.
The Ministry of Urban Development has been running several programmes to improve capacity of ULBs. This includes MoUs with 18 states to conduct training programmes for their ULB staff.
Coverage of the Mission: The Mission covers 100 cities, of which 99 have been announced as winners so far. The urban population that will be impacted through the Mission is around 96 million (data for 90 cities excluding the recently announced 9 cities).
As per Census 2011, India’s urban population was 377 million. The Mission impacts about 25% of this population. Further, most of the SCPs approved so far focus on area-based development, thus affecting a particular area of the cities. About 80% of the total project cost proposed is towards this model of development. In each city, this area-based development will cover up to 50 acres of area. The remaining 20% of the project cost is towards pan-city development proposals, which provide smart planning solutions for the entire city. It may be argued that even within the selected cities, the Mission will only impact few selected areas, and not necessarily help with development of the entire city.
There have been some recent developments in the sugar sector, which pertain to the pricing of sugarcane and deregulation of the sector. On January 31, the Cabinet approved the fair and remunerative price (FRP) of sugarcane for the 2013-14 season at Rs 210 per quintal, a 23.5% increase from last year’s FRP of Rs 170 per quintal. The FRP of sugarcane is the minimum price set by the centre and is payable by mills to sugarcane farmers throughout the country. However, states can also set a State Advised Price (SAP) that mills would have to pay farmers instead of the FRP. In addition, a recent news report mentioned that the food ministry has decided to seek Cabinet approval to lift controls on sugar, particularly relating to levy sugar and the regulated release of non-levy sugar. The Rangarajan Committee report, published in October 2012, highlighted challenges in the pricing policy for sugarcane. The Committee recommended deregulating the sugar sector with respect to pricing and levy sugar. In this blog, we discuss the current regulations related to the sugar sector and key recommendations for deregulation suggested by the Rangarajan Committee. Current regulations in the sugar sector A major step to liberate the sugar sector from controls was taken in 1998 when the licensing requirement for new sugar mills was abolished. Delicensing caused the sugar sector to grow at almost 7% annually during 1998-99 and 2011-12 compared to 3.3% annually during 1990-91 and 1997-98. Although delicensing removed some regulations in the sector, others still persist. For instance, every designated mill is obligated to purchase sugarcane from farmers within a specified cane reservation area, and conversely, farmers are bound to sell to the mill. Also, the central government has prescribed a minimum radial distance of 15 km between any two sugar mills. However, the Committee found that existing regulations were stunting the growth of the industry and recommended that the sector be deregulated. It was of the opinion that deregulation would enable the industry to leverage the expanding opportunities created by the rising demand of sugar and sugarcane as a source of renewable energy. Rangarajan Committee’s recommendations on deregulation of the sugar sector Price of sugarcane: The central government fixes a minimum price, the FRP that is paid by mills to farmers. States can also intervene in sugarcane pricing with an SAP to strengthen farmer’s interests. States such as Uttar Pradesh and Tamil Nadu have set SAPs for the past few years, which have been higher than FRPs. The Committee recommended that states should not declare an SAP because it imposes an additional cost on mills. Farmers should be paid a uniform FRP. It suggested determining cane prices according to scientifically sound and economically fair principles. The Committee also felt that high SAPs, combined with other controls in the sector, would deter private investment in the sugar industry. Levy sugar: Every sugar mill mandatorily surrenders 10% of its production to the central government at a price lower than the market price – this is known as levy sugar. This enables the central government to get access to low cost sugar stocks for distribution through the Public Distribution System (PDS). At present prices, the centre saves about Rs 3,000 crore on account of this policy, the burden of which is borne by the sugar sector. The Committee recommended doing away with levy sugar. States wanting to provide sugar under PDS would have to procure it directly from the market. Regulated release of non-levy sugar: The central government allows the release of non-levy sugar into the market on a periodic basis. Currently, release orders are given on a quarterly basis. Thus, sugar produced over the four-to-six month sugar season is sold throughout the year by distributing the release of stock evenly across the year. The regulated release of sugar imposes costs directly on mills (and hence indirectly on farmers). Mills can neither take advantage of high prices to sell the maximum possible stock, nor dispose of their stock to raise cash for meeting various obligations. This adversely impacts the ability of mills to pay sugarcane farmers in time. The Committee recommended removing the regulations on release of non-levy sugar to address these problems. Trade policy: The government has set controls on both export and import of sugar that fluctuate depending on the domestic availability, demand and price of sugarcane. As a result, India’s trade in the world trade of sugar is small. Even though India contributes 17% to global sugar production (second largest producer in the world), its share in exports is only 4%. This has been at the cost of considerable instability for the sugar cane industry and its production. The committee recommended removing existing restrictions on trade in sugar and converting them into tariffs. For more details on the committee’s recommendations on deregulating the sugar sector, see here.
