Applications for LAMP Fellowship 2025-26 are now open. Apply here. The last date for submitting applications is December 21, 2024

There has been no resolution so far to the issue of assured fuel supply from Coal India Limited (CIL) to power producers.  According to reports, while CIL released a model supply agreement in April 2012, so far only around 13 Fuel Supply Agreements (FSAs) have been signed.  Originally around 50 power units were expected to sign FSAs with CIL.  Power producers have objected to the model FSA released by CIL, particularly its force majeure provisions and the dilution of financial penalties in case of lower than contracted supply. Background The adverse power supply situation has attracted greater attention in the past few months.  According to Central Electricity Authority's data, the gap between peak demand and peak supply of power in March 2012 was 11 per cent.  The decreasing availability of fuel has emerged as a critical component of the worsening power supply situation.  As of March 31, 2012, there were 32 critical thermal power stations that had a coal stock of less than 7 days.  The gap between demand and supply of coal in the past three years is highlighted below: Table 1: Coal demand/Supply gap (In millions of tonnes)

 

2009-10

2010-11

2011-12

Demand

604

656

696

Supply

514

523

535

Gap

90

133

161

Source: PIB News Release dated May 7, 2012 Coal accounts for around 56 per cent of total installed power generation capacity in India.  Increased capacity in thermal power has also accounted for almost 81 per cent of the additional 62,374 MW added during the 11th Plan period.  Given the importance of coal in meeting national energy needs, the inability of CIL to meet its supply targets has become a major issue.  While the production target for CIL was 486 MT for 2011-12, its actual coal production was 436 MT. Fuel Supply Agreements In March 2012, the government asked CIL to sign FSAs with power plants that have been or would be commissioned by March 31, 2015.  These power plants should also have entered into long term Power Purchase Agreements with distribution companies.  After CIL did not sign FSAs by the deadline of March 31, 2012 the government issued a Presidential Directive to CIL on April 4, 2012 directing it to sign the FSAs.  The CIL board approved a model FSA in April 2012, which has not found acceptance by power producers. According to newspaper reports, many power producers have expressed their dissatisfaction with the model FSA released by CIL.  They have argued that it differs from the 2009 version of FSAs in some major ways.  These include:

  • The penalty for supplying coal below 80 per cent of the contracted amount has been reduced from 10 per cent to 0.01 per cent.  The penalty will be applicable only after three years.
  • The new FSA has extensive force majeure provisions that absolve CIL of non-supply in case of multiple contingencies – including equipment breakdown, power cuts, obstruction in transport, riots, failure to import coal due to “global shortage or delays… or no response to enquiries (by CIL) for supply of coal.”
  • CIL would have the discretion to annually review the supply level that would trigger a financial penalty.  There was no provision for such a review in the earlier FSA.

Most power producers, including NTPC, the country’s biggest power producer, have refused to sign the new FSA.  Reports suggest that the Power Minister has asked the Prime Minister’s Office to mandate CIL to sign FSAs within a month based on the 2009 format.  CIL has received a request from NTPC to consider signing FSAs based on the same parameters as their existing plants, but with the revised trigger point of 80 per cent (down from 90 per cent earlier). Underlying this situation is CIL’s own stagnating production.  Various experts have pointed to the prohibition on private sector participation in coal mining (apart from captive projects) and the backlog in granting environment and forest clearances as having exacerbated the coal supply situation.

On October 18, it was reportein the news that the central government has been given more time for framing rules under the Citizenship (Amendment) Act, 2019.  The President had given assent to this Act in December 2019 and the Act came into force in January 2020.   Similarly, about two years have passed since the new labour codes were passed by Parliament, and the final Rules are yet to be published.  This raises the question how long the government can take to frame Rules and what is the procedure guiding this.  In this blog, we discuss the same.

Under the Constitution, the Legislature has the power to make laws and the Executive is responsible for implementing them.  Often, the Legislature enacts a law covering the general principles and policies, and delegates the power to the Executive for specifying certain details for the implementation of a law.  For example, the Citizenship Amendment Act provides who will be eligible for citizenship.  The certificate of registration or naturalization to a person will be issued, subject to conditions, restrictions, and manner as may be prescribed by the central government through Rules.  Delay in framing Rules results in delay in implementing the law, since the necessary details are not available.  For example, new labour codes provide a social security scheme for gig economy workers such as Swiggy and Zomato delivery persons and Uber and Ola drivers.  These benefits as per these Codes are yet to be rolled out as the Rules are yet to be notified.

Timelines and checks and balances for adherence

Each House of Parliament has a Committee of Members to examine Rules, Regulations, and government orders in detail called the Committee on Subordinate Legislation.  Over the years, the recommendations of these Committees have shaped the evolution of the procedure and timelines for framing subordinate legislation.  These are reflected in the Manual of Parliamentary Procedures issued by the Ministry of Parliamentary Affairs, which provides detailed guidelines.

Ordinarily, Rules, Regulations, and bye-laws are to be framed within six months from the date on which the concerned Act came into force.   Post that, the concerned Ministry is required to seek an extension from the Parliamentary Committees on Subordinate Legislation.  The reason for the extension needs to be stated.   Such extensions may be granted for a maximum period of three months at a time.  For example, in case of Rules under the Citizenship Amendment Act, 2019, at an earlier instance, an extension was granted on account of the onset of the COVID-19 pandemic.

Activity

Timeline

  • Publication of Rules, Regulations, and Bye-Laws, where public consultation is required under the Act
  • A minimum of 30 days for public feedback
  • Consequently, for publication,
  • Three months, if the number of suggestions is small
  • Six months, if the number of suggestions is large
  • Publication of Rules, Regulations, and Bye-Laws, not requiring public consultation
  • Six months from the date on which the concerned Act came into force
  • Any extension for publication
  • A maximum of three months at a time

To ensure monitoring, every Ministry is required to prepare a quarterly report on the status of subordinate legislation not framed and share it with the Ministry of Law and Justice.  These reports are not available in the public domain.

Recommendations to address delays

Over the years, the Subordinate Legislation Committees in both Houses have observed multiple instances of non-adherence to the above timelines by various Ministries.  To address this, they have made the following key recommendations:

  • Statement on reasons for the delay: In 2011, Rajya Sabha Committee recommended that while laying Rules/Regulations before Parliament, the Ministry should also lay a statement explaining the reasons for the delay, if any.
  • Scrutiny of delays by the Cabinet Secretary:  In 2016, the Rajya Sabha Committee recommended that the Cabinet Secretary should continue the practice of calling the Secretaries of concerned Ministries/Departments, to explain the reasons for the delay in framing the subordinate legislation.  Each Ministry should send a quarterly status report to the Cabinet Secretariat.
  • Revisiting guidelines: In 2011, Lok Sabha Committee recommended that the 1986 guidelines should be revisited and all major recommendations of the Committee should be incorporated.  However, as per the Action Taken Report, the government observed that the ministries consider the extant guidelines adequate and these guidelines were re-iterated in 2012.

Are all Rules under an Act required to be framed?

Usually, the expressions used in an Act are “The Central Government may, by notification, make rules for carrying out the provisions of this Act.”, or “as may be prescribed”.  Hence, it may appear that the laws aim to enable rule-making instead of mandate rule-making.  However, certain provisions of an Act cannot be brought into force if the required details have not been prescribed under the Rules.  This makes the implementation of the Act consequent to the publication of respective Rules.  For example, the Criminal Procedure (Identification) Act, 2022 enables the police and certain other persons to collect identity-related information about certain persons.  It provides that the manner of collection of such information may be specified by the central government.  Unless the manner is prescribed, such collection cannot take place.

That said, some other rule-making powers may be enabling in nature and subject to discretion by the concerned Ministry.  In 2016, Rajya Sabha Committee on Subordinate Legislation examined the status of Rules and Regulations to be framed under the Energy Conservation Act, 2001.  It observed that the Ministry of Power had held that two Rules and three Regulations under this Act were not necessary.   The Ministry of Law and Justice had opined that those deemed not necessary were enabling provisions meant for unforeseen circumstances.  The Rajya Sabha Committee (2016) had recommended that where the Ministry does not feel the need for framing subordinate legislation, the Minister should table a statement in Parliament, stating reasons for such a conclusion.

Some key issues related to subordinate legislation

The Legislature delegates the power to specify details for the implementation of a law to the Executive through powers for framing subordinate legislation.  Hence, it is important to ensure these are well-scrutinised so that they are within the limits envisaged in the law.

  • Capacity of Committees on Subordinate Legislation:  Parliamentary Committees on Subordinate Legislation have the responsibility to examine Rules in detail.  In past, they have examined some key rules, regulations, and notifications regarding e-commerceliability of internet-based services, and demonetisation.  However, usually, they are able to examine only a fraction of subordinate legislation in detail.  For more details, please see the PRS discussion paper here.
  • Uniformity of standards:  Countries such as UKUSAAustralia, and Canada have overarching legislation for regulating the framing of subordinate legislation.  These laws provide for the manner of public consultation, timelines, drafting standards, and a common register.  India does not have any similar law.  In India, the detail whether public consultation for subordinate legislation is required or not, is specified in respective Acts.  The General Clauses Act, 1897 also governs certain aspects of the framing of subordinate legislation.  In addition, the Pre-Legislative Consultation Policy, 2014 guides the pre-legislative consultation on subordinate legislation.

See here for our recently published analysis of the Criminal Procedure (Identification) Rules, 2022, notified in September 2022.  Also, check out PRS analysis of: