The Financial Resolution and Deposit Insurance Bill, 2017 was introduced in Lok Sabha during Monsoon Session 2017. The Bill is currently being examined by a Joint Committee of the two Houses of Parliament. It seeks to establish a Resolution Corporation which will monitor the risk faced by financial firms such as banks and insurance companies, and resolve them in case of failure. For FAQs explaining the regulatory framework under the Bill, please see here.
Over the last few days, there has been some discussion around provisions of the Bill which allow for cancellation or writing down of liabilities of a financial firm (known as bail-in).[1],[2] There are concerns that these provisions may put depositors in an unfavourable position in case a bank fails. In this context, we explain the bail-in process below.
What is bail-in?
The Bill specifies various tools to resolve a failing financial firm which include transferring its assets and liabilities, merging it with another firm, or liquidating it. One of these methods allows for a financial firm on the verge of failure to be rescued by internally restructuring its debt. This method is known as bail-in.
Bail-in differs from a bail-out which involves funds being infused by external sources to resolve a firm. This includes a failing firm being rescued by the government.
How does it work?
Under bail-in, the Resolution Corporation can internally restructure the firm’s debt by: (i) cancelling liabilities that the firm owes to its creditors, or (ii) converting its liabilities into any other instrument (e.g., converting debt into equity), among others.[3]
Bail-in may be used in cases where it is necessary to continue the services of the firm, but the option of selling it is not feasible.[4] This method allows for losses to be absorbed and consequently enables the firm to carry on business for a reasonable time period while maintaining market confidence.3 The Bill allows the Resolution Corporation to either resolve a firm by only using bail-in, or use bail-in as part of a larger resolution scheme in combination with other resolution methods like a merger or acquisition.
Do the current laws in India allow for bail-in? What happens to bank deposits in case of failure?
Current laws governing resolution of financial firms do not contain provisions for a bail in. If a bank fails, it may either be merged with another bank or liquidated.
In case of bank deposits, amounts up to one lakh rupees are insured by the Deposit Insurance and Credit Guarantee Corporation (DICGC). In the absence of the bank having sufficient resources to repay deposits above this amount, depositors will lose their money. The DICGC Act, 1961 originally insured deposits up to Rs 1,500 and permitted the DICGC to increase this amount with the approval of the central government. The current insured amount of one lakh rupees was fixed in May 1993.[5] The Bill has a similar provision which allows the Resolution Corporation to set the insured amount in consultation with the RBI.
Does the Bill specify safeguards for creditors, including depositors?
The Bill specifies that the power of the Corporation while using bail-in to resolve a firm will be limited. There are certain safeguards which seek to protect creditors and ensure continuity of critical functions of the firm. 
When resolving a firm through bail-in, the Corporation will have to ensure that none of the creditors (including bank depositors) receive less than what they would have been entitled to receive if the firm was to be liquidated.[6],[7]
Further, the Bill allows a liability to be cancelled or converted under bail-in only if the creditor has given his consent to do so in the contract governing such debt. The terms and conditions of bank deposits will determine whether the bail-in clause can be applied to them.
Do other countries contain similar provisions?
After the global financial crisis in 2008, several countries such as the US and those across Europe developed specialised resolution capabilities. This was aimed at preventing another crisis and sought to strengthen mechanisms for monitoring and resolving sick financial firms.
The Financial Stability Board, an international body comprising G20 countries (including India), recommended that countries should allow resolution of firms by bail-in under their jurisdiction. The European Union also issued a directive proposing a structure for member countries to follow while framing their respective resolution laws. This directive suggested that countries should include bail-in among their resolution tools. Countries such as UK and Germany have provided for bail-in under their laws. However, this method has rarely been used.7,[8] One of the rare instances was in 2013, when bail-in was used to resolve a bank in Cyprus.
———————————————–
[1] ‘Modi government’s FRDI bill may take away all your hard-earned money’, India Today, December 5, 2017, http://indiatoday.intoday.in/story/frdi-bill-banking-reforms-modi-government-india-parliament/1/1103422.html.
[2] ‘Bail-in doubts — on financial resolution legislation’, The Hindu, December 5, 2017, http://www.thehindu.com/opinion/editorial/bail-in-doubts/article21261606.ece.
[3] Section 52, The Financial Resolution and Deposit Insurance Bill, 2017.
[4] Report of the Committee to Draft Code on Resolution of Financial Firms, September 2016, http://www.prsindia.org/uploads/media/Financial%20Resolution%20Bill,%202017/FRDI%20Bill%20Drafting%20Committee%20Report.pdf.
[5] The Deposit Insurance and Credit Guarantee Corporation Act, 1961, https://rbidocs.rbi.org.in/rdocs/Publications/PDFs/dicgc_act.pdf. s
[6] Section 55, The Financial Resolution and Deposit Insurance Bill, 2017.
[7] The Bank of England’s approach to resolution, October 2014, Bank of England.
[8] Recovery and resolution, BaFin, Federal Financial Supervisory Authority of Germany, https://www.bafin.de/EN/Aufsicht/BankenFinanzdienstleister/Massnahmen/SanierungAbwicklung/sanierung_abwicklung_artikel_en.html.
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
|
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
|
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
|
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
|
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
|
Method of calculation |
Recommendation and its status |
|
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
|
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
|
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
|
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
