With 4,203 confirmed cases of COVID-19, Maharashtra has the highest number of cases in the country as of April 20, 2020.  Of these, 507 have been cured, and 223 have died.  In this blog, we summarise some of the key decisions taken by the Government of Maharashtra for containing the spread of COVID-19 in the state. 

 image

Measures taken prior to lockdown

By March 12, the state had registered 11 cases of COVID-19. Consequently, the state government took measures to: (i) prepare hospitals for screening and testing of patients, and (ii) limit mass gathering given the highly contagious nature of the disease. The measures taken by the government before the lockdown are summarised below.

Health Measures

On March 14, the government notified the Maharashtra COVID-19 regulations to prevent and contain the spread of COVID-19 in the state.  Key features of the regulations include: (i) screening of COVID-19 patients in hospitals, (ii) home quarantine for people who have travelled through the affected areas, and (iii) procedures to be followed in the containment zones, among others. 

Movement Restrictions

On March 15, with 31 COVID-19 cases in the state, the Department of Public Health ordered the closure of cinema halls, swimming pools, gyms, theatres, and museums until March 31.   On March 16, all educational institutions and hostels in the state were closed till March 31.  The teaching staff was advised to work from home.  All exams were also deferred until March 31.

Administrative Measures

On March 13, the Maharashtra government constituted a high-level committee to formulate guidelines for mitigating of the spread of COVID-19 in the state.  The responsibilities of the committee included: (i) taking a daily review of the status of COVID-19 in the state, and (ii) implementing the guidelines issued by the World Health Organisation and the Ministry of Health.

On March 17, the first casualty due to COVID-19 occurred in the state.  On March 19, the government put restrictions on meetings in the government offices and issued safety guidelines to be followed in these meetings.

On March 20, considering the unmitigated spread of COVID-19 in Mumbai, Pune and Nagpur, the attendance in government offices was restricted to 25%. Subsequently, on March 23, the government limited the attendance in government offices to 5% across the state.

Measures taken post-lockdown

To further restrict the movement of individuals, in order to contain the spread of the disease, the state government enforced a state-wide lockdown on March 23. This lockdown, applicable till March 31, involved: (i) closing down of state borders, (ii) suspension of public transport services, and (iii) banning the congregation of more than five people at any public place. Entities engaged in the supply of essential goods and services were excluded from this lockdown.  This was followed by a nation-wide lockdown enforced by the central government between March 25 and April 14, now extended till May 3.  Before the extension announced by the central government, the state government extended the lockdown in the state till April 30.

On April 15, the Ministry of Home Affairs issued guidelines on the measures to be taken by state governments until May 3.  As per these guidelines, select activities will be permitted in less-affected districts from April 20 onwards to reduce the hardships faced by people.  Some of the permitted activities are (i) agriculture and related activities, (ii) MNERGA works, (iii) construction activities, (iv) industrial establishments, (v) health services, (vi) certain financial sector activities among others subject to certain conditions. 

Welfare Measures

To address the hardship being faced by residents of the state due to lockdown, the state took several welfare measures summarised as follows:

  • On March 30, the School Education Department issued directions to all schools in the state to postpone the collection of school fees until the lockdown is over.

  • The Department of Tribal Development issued directions to provide food/dietary components at home to women beneficiaries and children under Bharat Ratna Dr A.P.J. Abdul Kalam Amrut Aahar Yojana. 

  • The state government issued directives to the private establishments, industries and companies to pay full salaries and wages to their employees. 

  • On April 7, the state Cabinet decided to provide wheat and rice at a subsidised price to all Above Poverty line ration card holders and Shiv Bhojan at Rs 5 for next three months in all Shiv Bhojan centres.

  • On April 17, the Housing Department notified that landlords/house owners should defer the rent collection for three months.  No eviction will be allowed due to non-payment of rent during this period. 

Administrative Measures

  • On March 29, the public works department issued directions suspending the collection of tolls at PWD and MSRDC toll plazas for goods transport until further direction.

  • MLA Local Development Program:  Under MLALAD program, a one-time special exception to use the MLALAD funds was given to legislators for the purchase of medical equipment and materials for COVID-19 during the year 2020-21.

  • Analysing the impact on the economy of the state:  On April 13, the government constituted an Expert Committee and a Cabinet Sub-Committee to analyse the implications of COVID-19 on the economy of the state. These committees will also suggest measures to revive the economy of the state.

Orders relating to Mumbai city

  • On April 8, the city administration made it compulsory for all people to wear masks in public places. 

  • On April 10, the Commissioner of Police, Greater Mumbai issued an order prohibiting any kind of fake or distorted information on all social media and messaging applications. The order is valid until April 24.

For more information on the spread of COVID-19 and the central and state government response to the pandemic, please see here.

 

Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts.  It had first recommended these names earlier this year and in August last year, but these appointments were not made.  The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts).  Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases.  As of today, more than four crore cases are pending across all courts in India.   In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.

High vacancy of judges across courts

Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges.  Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually.  However, vacancies persist due to insufficient appointments (see Figures 1 and 2).  Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts). 

Figure 1: Vacancy of judges in High Courts

Figure 2: Vacancy of judges in subordinate courts

image

image

Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS.

As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34).  Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098).  Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges.  In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3).  The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled. 

Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)

image

Source: Vacancy Statement, Department of Justice; PRS.

 

 

 

 

 

 

 

 

 

Appointments of High Court judges are guided by a memorandum of procedure.  As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs.  However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts.  Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court.  No timeline is prescribed for this stage of the appointment process.  In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.

As of today, over 3.6 crore cases are pending before subordinate courts in India.  As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts.  Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4).  Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.

For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.

Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)

image

Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS.

 

How many judges do we need?

The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary.  Lack of adequate number of judges means a greater workload per judge.  Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts.  Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1). 

Table 1: Methods recommended for calculating the required number of judges for subordinate courts

Method of calculation

Recommendation and its status

Judge-to-population ratio: optimum number of judges per million population

The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people.  This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002).  For 2020, the judge-to-population ratio was 21 judges per million population.     Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts.

Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge

The Law Commission of India (2014) proposed this method.  It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions.

Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions

The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method.     It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts.     In 2017, the Supreme Court accepted this model.

Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study

Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts.  It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court.  The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi.

Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.